Subaru Legacy IV (2008 year). Service manual — part 92
SP(H4SO)-2
General Description
SPEED CONTROL SYSTEMS
1. General Description
A: SPECIFICATION
B: COMPONENT
C: CAUTION
• Wear appropriate work clothing, including a cap, protective goggles and protective shoes when performing
any work.
• Remove contamination including dirt and corrosion before removal or installation.
• Keep the parts in order and protect them from dust and dirt.
• Before removal or installation, be sure to clarify the failure. Avoid unnecessary removal, installation, dis-
assembly and replacement.
• Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
• Be sure to tighten fasteners including bolts and nuts to the specified torque.
• Place shop jacks or rigid racks at the specified points.
• Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from the bat-
tery.
Accelerator pedal
Stroke
At pedal pad
54 — 59 mm (2.13 — 2.32 in)
(1)
Accelerator pedal ASSY
(4)
Accelerator stopper
Tightening torque:N·m (kgf-m, ft-lb)
(2)
Clip
(5)
Accelerator pedal bracket
T: 18 (1.8, 13.3)
(3)
Accelerator
plate
SP-02049
T
T
(1)
(5)
(4)
T
T
(3)
(2)
SP(H4SO)-3
Accelerator Pedal
SPEED CONTROL SYSTEMS
2. Accelerator Pedal
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector (A).
3) Remove the nut (B) securing accelerator pedal
assembly.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
C: DISASSEMBLY
NOTE:
The accelerator pedal cannot be disassembled.
D: INSPECTION
1) Check for smooth operation when the accelera-
tor pedal is depressed.
2) Check if the accelerator pedal returns to its orig-
inal position smoothly when the pedal is released.
IN-00203
SP-02050
(B)
(A)
SP(H4SO)-4
Accelerator Pedal
SPEED CONTROL SYSTEMS
IG(H4SO)-2
General Description
IGNITION
1. General Description
A: SPECIFICATION
B: COMPONENT
Item
Specification
Ignition coil & ignitor
assembly
Type
FH 0363
Manufacturer
Diamond Electric
Secondary coil resistance
11.2 k
:r15%
Spark plug
Manufacturer and type
NGK: FR5AP-11
Thread size (diameter, pitch, length)
mm
14, 1.25, 19
Spark plug gap
mm (in)
1.0 — 1.1 (0.039 — 0.043)
Electrode
Platinum
(1)
Spark plug
(4)
Spark plug cord (#2, #4)
Tightening torque:N·m (kgf-m, ft-lb)
(2)
Spark plug cord (#1, #3)
T1: 8 (0.8, 5.9)
(3)
Ignition coil and ignitor ASSY
T2: 21 (2.1, 15.5)
T2
T1
(4)
(2)
(2)
(3)
(1)
(4)
IG-02078
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст