Subaru Legacy IV (2008 year). Service manual — part 1154
CC-9
Inhibitor Switch
CRUISE CONTROL SYSTEM
7. Inhibitor Switch
A: NOTE
1. 4AT MODEL
For the inhibitor switch, refer to 4AT section. <Ref.
to 4AT-46, INSPECTION, Inhibitor Switch.>
2. 5AT MODEL
Inhibitor switch cannot be removed and checked,
because the inhibitor switch is installed on control
valve assembly.
When a malfunction occurs, refer to 5AT (diag)
section. <Ref. to 5AT(diag)-35, DTC P0705
TRANSMISSION RANGE SENSOR CIRCUIT
(PRNDL INPUT), Diagnostic Procedure with Diag-
nostic Trouble Code (DTC).>
CC-10
Transmission Control Module (TCM)
CRUISE CONTROL SYSTEM
8. Transmission Control Module
(TCM)
A: NOTE
For the transmission control module (TCM), refer to
the following section.
• 4AT model <Ref. to 4AT-61, Transmission Con-
trol Module (TCM).>
• 5AT model <Ref. to 5AT-60, Transmission Con-
trol Module (TCM).>
CC-11
Neutral Position Switch
CRUISE CONTROL SYSTEM
9. Neutral Position Switch
A: NOTE
For the neutral position switch, refer to the following
section.
• 5MT model <Ref. to 5MT-35, Switches and Har-
ness.>
• 6MT model <Ref. to 6MT-41, Neutral Position
Switch.>
CC-12
Neutral Position Switch
CRUISE CONTROL SYSTEM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст