Subaru Legacy IV (2008 year). Service manual — part 455
FU(H6DO)-39
Main Relay
FUEL INJECTION (FUEL SYSTEMS)
20.Main Relay
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the glove box. <Ref. to EI-52, REMOV-
AL, Glove Box.>
3) Remove the harness cover (A).
4) Disconnect the connectors from main relay.
B: INSTALLATION
Install in the reverse order of removal.
IN-00203
FU-02092
(A)
FU-02406
FU(H6DO)-40
Fuel Pump Relay
FUEL INJECTION (FUEL SYSTEMS)
21.Fuel Pump Relay
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the glove box. <Ref. to EI-52, REMOV-
AL, Glove Box.>
3) Remove the harness cover (A).
4) Disconnect the connector from fuel pump relay.
B: INSTALLATION
Install in the reverse order of removal.
IN-00203
FU-02092
(A)
FU-02407
FU(H6DO)-41
Electronic Throttle Control Relay
FUEL INJECTION (FUEL SYSTEMS)
22.Electronic Throttle Control
Relay
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the glove box. <Ref. to EI-52, REMOV-
AL, Glove Box.>
3) Remove the harness cover (A).
4) Disconnect the connector from electronic throttle
control relay.
B: INSTALLATION
Install in the reverse order of removal.
IN-00203
FU-02092
(A)
FU-02408
FU(H6DO)-42
Fuel Pump Control Unit
FUEL INJECTION (FUEL SYSTEMS)
23.Fuel Pump Control Unit
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear quarter trim of the left side.
(Wagon model) <Ref. to EI-63, REMOVAL, Rear
Quarter Trim.>
3) Peel the trunk side trim of the left side. (Sedan
model)
4) Remove the fuel pump control unit.
• Wagon model
• Sedan model
5) Disconnect the connector from fuel pump control
unit.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
IN-00203
FU-03220
FU-03231
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст