Subaru Legacy IV (2008 year). Service manual — part 1184
LAN(diag)-70
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
LAN SYSTEM (DIAGNOSTICS)
Q: DTC U1301 CAN-LS COUNTER ABNORMAL
DTC DETECTING CONDITION:
Find the unit in which trouble occurs and open or short CAN line, and repair and replace them.
(Free running counter error may be detected at the same time from the unit in which the malfunction occurs.)
TROUBLE SYMPTOM:
“Er LC” is displayed in odo/trip meter. (Except for meter with MID)
WIRING DIAGRAM:
i106
i10
B282
21
22
14
6
i119
A27
A26
B26
B25
i84
B280
10
9
B:
A:
B:
i107
*
1
*
1
*
1
*
1
*
1
*
1
i10
LAN00383
CAN
JOINT
CONNECTOR
ON
WN
WN
ON
TWISTED PAIR LINE
TWISTED PAIR LINE
COMBINATION METER
BODY
INTEGRATED
UNIT
i119
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
1 2 3 4 5
6 7 8 9 10
11 12
19 20 21
13 14 15 16 17 18
22
5
4
6 7
8
2
1
9
3
10
22
23
11 12 13 14 15
24 25
26 27
16 17 18
28 29
19 20
21
30
B280
A:
i84
1 2
3 4
5 6
7 8
9 10 11 12
14 15 16 17 18 19 20 21 22 23
24 25
26 27 28 29
30 31 32 33
34 35
13
B282
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
*
1
ON
WN
WA
WA
WA
AUTO A/C
CONTROL
MODULE
CENTER
DISPLAY
: TERMINAL No. OPTIONAL ARRANGEMENT
: WITH NAVIGATION
: WITHOUT NAVIGATION
: WITH AUTO A/C
LAN(diag)-71
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
LAN SYSTEM (DIAGNOSTICS)
Step
Check
Yes
No
1
CHECK DTC.
Connect the Subaru Select Monitor and read
the DTC of the body integrated unit.
Are there any other DTC
besides U1301?
Perform diagnosis
according to other
DTC.
Go to step 2.
2
CHECK DTC.
Check the DTC displayed in the body integrated
unit.
Is U1301 current malfunction?
Check the connec-
tion of harness
connectors. Go to
step 3.
Go to step 3.
3
CHECK DTC.
Turn the ignition switch to OFF and read DTCs
again.
Is U1301 current malfunction?
Go to step 4.
Temporary poor
contact occurs.
4
CHECK CURRENT DATA.
Check the current data (auto A/C failure) of the
body integrated unit using the Subaru Select
Monitor.
Is OK displayed?
Go to step 5.
Perform the auto A/
C self-diagnosis.
<Ref. to AC(diag)-
9, OPERATION,
Diagnostic Chart
for Self-Diagno-
sis.>
5
CHECK AUTO A/C ECM.
1) Turn the ignition switch to OFF.
2) Disconnect the auto A/C control module
connector (B282).
3) Connect the Subaru Select Monitor and
then turn the ignition switch to ON.
4) Perform the clear memory operation for the
body integrated unit.
5) Read the DTC of the body integrated unit.
Is DTC U1301 detected?
Go to step 7.
Go to step 6.
6
CHECK HARNESS.
1) Disconnect the body integrated unit connec-
tor (B280) and auto A/C control module connec-
tor (B282).
2) Check open or short conditions between
body integrated unit connector and auto A/C
control module connector.
Connector & terminal
(B282) No. 10 — (B280) No. 26:
(B282) No. 9 — (B280) No. 25:
Is harness normal?
Replace auto A/C
ECM. <Ref. to AC-
35, REMOVAL,
Control Unit (Auto
A/C Model).>
Repair or replace
the open or short
circuit of harness.
7
CHECK CURRENT DATA.
Check current data (center display failure) of the
body integrated unit.
Is OK displayed?
Go to step 8.
Repair or replace
the center display.
<Ref. to ET-19,
REMOVAL, Navi-
gation Display.>
8
CHECK CENTER DISPLAY.
1) Turn the ignition switch to OFF.
2) Disconnect the center display connector
(i119).
3) Connect the Subaru Select Monitor and
then turn the ignition switch to ON.
4) Perform the clear memory operation for the
body integrated unit.
5) Read the DTC of the body integrated unit.
Is DTC U1301 detected?
Go to step 10.
Go to step 9.
9
CHECK HARNESS.
1) Disconnect the body integrated unit connec-
tor (B280) and center display connector (i119).
2) Check open or short conditions between
body integrated unit connector and center dis-
play connector.
Connector & terminal
(i119) No. 14 — (i84) No. 26:
(i119) No. 6 — (i84) No. 27:
Is harness normal?
Replace the center
display. <Ref. to
AC-35, REMOVAL,
Control Unit (Auto
A/C Model).>
Repair or replace
the open or short
circuit of harness.
LAN(diag)-72
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
LAN SYSTEM (DIAGNOSTICS)
10
CHECK CURRENT DATA.
Check current data (meter failure) of the body
integrated unit.
Is OK displayed?
Go to step 11.
Replace the com-
bination meter.
<Ref. to IDI-22,
REMOVAL, Com-
bination Meter.>
11
CHECK COMBINATION METER.
1) Turn the ignition switch to OFF.
2) Disconnect the combination meter connec-
tor (i10).
3) Connect the Subaru Select Monitor and
then turn the ignition switch to ON.
4) Perform the clear memory operation for the
body integrated unit.
5) Read the DTC of the body integrated unit.
Is DTC U1301 detected?
Go to step 13.
Go to step 12.
12
CHECK HARNESS.
1) Disconnect the combination meter connec-
tor (i10).
2) Check open or short conditions between
body integrated unit connector and combination
meter connector.
Connector & terminal
(i10) No. 21 — (i84) No. 27:
(i10) No. 22 — (i84) No. 26:
Is harness normal?
Replace the com-
bination meter.
<Ref. to IDI-22,
REMOVAL, Com-
bination Meter.>
Repair or replace
the open or short
circuit of harness.
13
CHECK HARNESS.
1) Disconnect connectors of A/C ECM (B282),
center monitor (i119), combination meter (i10)
and body integrated unit connector (i84).
2) Measure the resistance between connector
terminals.
Connector & terminal
(i84) No. 27 — (i84) No. 26:
Is the resistance 1 M
: or
more?
Go to step 14.
Repair the short
circuit of harness
or replace har-
ness.
14
CHECK HARNESS.
1) Connect the disconnected connectors.
2) Measure the resistance between body inte-
grated unit connector and chassis ground.
Connector & terminal
(B280) No. 25 — Chassis ground:
(B280) No. 26 — Chassis ground:
(i84) No. 26 — Chassis ground:
(i84) No. 27 — Chassis ground:
Is the resistance less than 10
:? Repair the short
circuit of harness
or replace har-
ness.
Go to step 15.
15
CHECK HARNESS.
1) Turn the ignition switch to ON.
2) Measure the voltage between body inte-
grated unit connector and chassis ground.
Connector & terminal
(B280) No. 25 (+) — Chassis ground (–):
(B280) No. 26 (+) — Chassis ground (–):
(i84) No. 26 (+) — Chassis ground (–):
(i84) No. 27 (+) — Chassis ground (–):
Is the voltage 6 V or more?
Repair the short
circuit of harness
or replace har-
ness.
Replace the body
integrated unit.
<Ref. to SL-56,
REMOVAL, Body
Integrated Unit.>
Step
Check
Yes
No
LAN(diag)-73
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
LAN SYSTEM (DIAGNOSTICS)
R: DTC U1302 CAN-LS BUS OFF
DTC DETECTING CONDITION:
• Because of a lot of error data occurred, some units have been disconnected not to affect other units.
• Communication failure from the unit in which error is occurred is input at the same time.
TROUBLE SYMPTOM:
“Er LC” is displayed in odo/trip meter. (Except for meter with MID)
WIRING DIAGRAM:
i106
i10
B282
21
22
14
6
i119
A27
A26
B26
B25
i84
B280
10
9
B:
A:
B:
i107
*
1
*
1
*
1
*
1
*
1
*
1
i10
LAN00383
CAN
JOINT
CONNECTOR
ON
WN
WN
ON
TWISTED PAIR LINE
TWISTED PAIR LINE
COMBINATION METER
BODY
INTEGRATED
UNIT
i119
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
1 2 3 4 5
6 7 8 9 10
11 12
19 20 21
13 14 15 16 17 18
22
5
4
6 7
8
2
1
9
3
10
22
23
11 12 13 14 15
24 25
26 27
16 17 18
28 29
19 20
21
30
B280
A:
i84
1 2
3 4
5 6
7 8
9 10 11 12
14 15 16 17 18 19 20 21 22 23
24 25
26 27 28 29
30 31 32 33
34 35
13
B282
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
*
1
ON
WN
WA
WA
WA
AUTO A/C
CONTROL
MODULE
CENTER
DISPLAY
: TERMINAL No. OPTIONAL ARRANGEMENT
: WITH NAVIGATION
: WITHOUT NAVIGATION
: WITH AUTO A/C
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст