Subaru Legacy IV (2008 year). Service manual — part 438
GD(H4DOTC)-202
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
DW:DTC P2096 POST CATALYST FUEL TRIM SYSTEM TOO LEAN (BANK 1)
1. OUTLINE OF DIAGNOSIS
Detect the malfunction of fuel system from the size of the sub feedback learning value.
Control the sub feedback learning and judge as NG when the learning value is in the lean zone.
2. COMPONENT DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
Perform the diagnosis continuously when the vehicle is idling or running at a constant speed of 80 km/h (50
MPH) or more.
(A)
Electromotive force
(C)
Rich
(E)
Theoretical air fuel ratio
(B)
Air fuel ratio
(D)
Lean
(F)
Comparative voltage
(1)
Atmosphere
(2)
Exhaust gas
(3)
Electromotive force
Secondary Parameters
Enable Conditions
Conditions for carrying out the sub feed-
back learning
Completed
Continuous time when all conditions are
established.
t 1 s
EN-01696
(3)
V
(1)
(2)
(2)
(E)
(F)
(C)
(B)
(D)
(A)
GD(H4DOTC)-203
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
5. DIAGNOSTIC METHOD
• Abnormality Judgement
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 5 s × 1 time(s)
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cy-
cles.
• Normality Judgement
Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.
Time Needed for Diagnosis: 5 s
Judgement Value
Malfunction Criteria
Threshold Value
Sub feedback learning value
< –0.02 (AT model)
< –0.02 (MT model)
Judgement Value
Malfunction Criteria
Threshold Value
Sub feedback learning value
t –0.02 + 0.005
(AT model)
t –0.02 + 0
(MT model)
GD(H4DOTC)-204
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
DX:DTC P2097 POST CATALYST FUEL TRIM SYSTEM TOO RICH (BANK 1)
1. OUTLINE OF DIAGNOSIS
Detect the malfunction of fuel system from the size of the sub feedback learning value.
Sub feedback learning is being performed. When the learning value goes to the rich side, judge as NG.
2. COMPONENT DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
Perform the diagnosis continuously when the vehicle is idling or running at a constant speed of 80 km/h (50
MPH) or more.
(A)
Electromotive force
(C)
Rich
(E)
Theoretical air fuel ratio
(B)
Air fuel ratio
(D)
Lean
(F)
Comparative voltage
(1)
Atmosphere
(2)
Exhaust gas
(3)
Electromotive force
Secondary Parameters
Enable Conditions
Conditions for carrying out the sub feed-
back learning
Completed
Continuous time when all conditions are
established.
t 1 s
EN-01696
(3)
V
(1)
(2)
(2)
(E)
(F)
(C)
(B)
(D)
(A)
GD(H4DOTC)-205
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
5. DIAGNOSTIC METHOD
• Abnormality Judgement
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
Time Needed for Diagnosis: 5 s × 1 time(s)
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cy-
cles.
• Normality Judgement
Judge as OK and clear the NG if the continuous time while the following conditions are established is more
than the predetermined time.
Time Needed for Diagnosis: 5 s
Judgement Value
Malfunction Criteria
Threshold Value
Sub feedback learning value
t 0.04 (AT model)
t 0.04 (MT model)
Judgement Value
Malfunction Criteria
Threshold Value
Sub feedback learning value
< 0.04 + –0.005
(AT model)
< 0.04 + 0
(MT model)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст