Subaru Legacy IV (2008 year). Service manual — part 426
GD(H4DOTC)-154
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
CF:DTC P0604 INTERNAL CONTROL MODULE RANDOM ACCESS MEMORY
(RAM) ERROR
1. OUTLINE OF DIAGNOSIS
Detect the malfunction of microcomputer (RAM).
When there is a problem in the main CPU normal RAM, or the sub CPU normal RAM, judge as NG. Judge
as OK when both are operating properly.
If it is possible to write data to the whole area of RAM in the initial routine, and is possible to read the same
data, it is judged as OK, and if not, NG.
2. ENABLE CONDITION
Diagnosis with the initial routine.
3. GENERAL DRIVING CYCLE
Perform the diagnosis as soon as the ignition switch is turned to ON.
4. DIAGNOSTIC METHOD
• Abnormality Judgement
Judge as NG when the following conditions are established.
Time Needed for Diagnosis: Less than 1 second
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
• Normality Judgement
Judge as OK and clear the NG if the following conditions are established.
Time Needed for Diagnosis: Less than 1 second
Secondary Parameters
Enable Conditions
None
Judgement Value
Malfunction Criteria
Threshold Value
Write the specified value to RAM and
then read.
The written value
cannot be read.
Judgement Value
Malfunction Criteria
Threshold Value
Write the specified value to RAM and
then read.
The written value can
be read.
GD(H4DOTC)-155
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
CG:DTC P0605 INTERNAL CONTROL MODULE READ ONLY MEMORY (ROM)
ERROR
1. OUTLINE OF DIAGNOSIS
Judge as NG when SUM value of ROM is outside the standard value.
2. ENABLE CONDITION
3. GENERAL DRIVING CYCLE
Always perform the diagnosis continuously.
4. DIAGNOSTIC METHOD
• Abnormality Judgement
Judge as NG when the following conditions are established.
Time Needed for Diagnosis:
• Main CPU: 16 milliseconds × 32 time(s)
• Sub CPU: 16 milliseconds × 2 time(s)
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
• Normality Judgement
Judge as OK and clear the NG if the following conditions are established.
Time Needed for Diagnosis:
• Main CPU: 16 milliseconds × 125 time(s)
• Sub CPU: 16 milliseconds × 2 time(s)
Secondary Parameters
Enable Conditions
Ignition switch
ON
Judgement Value
Malfunction Criteria
Threshold Value
SUM value of ROM
Standard
Judgement Value
Malfunction Criteria
Threshold Value
SUM value of ROM
Standard
GD(H4DOTC)-156
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
CH:DTC P0607 THROTTLE CONTROL SYSTEM CIRCUIT RANGE/PERFORMANCE
1. OUTLINE OF DIAGNOSIS
Judge as NG when any one of the followings is established.
(1) When the read value of throttle position sensor 1 signal is mismatched between main CPU and sub CPU.
(2) When the read value of accelerator pedal position sensor 1 signal is mismatched between main CPU and
sub CPU.
(3) When the sub CPU operates abnormally.
(4) When the communication between main CPU
m o sub CPU is abnormal.
(5) When the input amplifier circuit of throttle position sensor 1 is abnormal.
(6) When the cruise control cannot be canceled correctly.
(7) When the signal of brake SW1 and 2 is mismatched.
2. COMPONENT DESCRIPTION
(1)
Throttle position sensor
(6)
Accelerator pedal position sensor 2
(11)
Amplifier circuit
(2)
Throttle position sensor 1
(7)
Battery
(12)
Engine control module (ECM)
(3)
Throttle position sensor 2
(8)
Stop light
(13)
Sub CPU
(4)
Accelerator pedal position sensor
(9)
Brake switch
(14)
Main CPU
(5)
Accelerator pedal position sensor 1
(10)
I/F circuit
EN-01862
(1)
(4)
(2)
(3)
(5)
(6)
(7)
(8)
(9)
(12)
(11)
(10)
(10)
(10)
(10)
(13)
(14)
GD(H4DOTC)-157
Diagnostic Trouble Code (DTC) Detecting Criteria
GENERAL DESCRIPTION
3. ENABLE CONDITION
4. GENERAL DRIVING CYCLE
(1) — (4): Always perform the diagnosis continuously.
(5): Always perform the diagnosis continuously when idling.
(6): Perform the diagnosis when the brake pedal is depressed.
(7): Always perform the diagnosis continuously.
5. DIAGNOSTIC METHOD
• Abnormality Judgement
Judge as NG when the following conditions are established.
Time Needed for Diagnosis:
(1): 600 ms
(2): 830 ms
(3): 200 ms
(4): 200 ms
(5): 24 ms
(6): 250 ms
(7): 200 ms
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
Secondary Parameters
Enable Conditions
(1) Ignition switch
ON
(1) Battery voltage
t 6 V
(2) Ignition switch
ON
(2) Battery voltage
t 6 V
(3) Ignition switch
ON
(3) Battery voltage
t 6 V
(4) Ignition switch
ON
(4) Battery voltage
t 6 V
(5) Throttle opening angle
(5) Ignition switch
ON
(5) Battery voltage
t 6 V
(6) Brake switch (only with cruise control) ON
(6) Ignition switch
ON
(6) Battery voltage
t 6 V
(7) Ignition switch
ON
(7) Battery voltage
t 6 V
Judgement Value
Malfunction Criteria
Threshold Value
(1) Difference of CPU reading value of
the throttle position sensor signal
t 0.4058 V
(2) Difference of CPU read value of the
accelerator pedal position sensor signal
t 0.127542424 V
(3) WD pulse from sub CPU
No WD pulse occur
(4) Communication between CPU
Not possible to com-
municate
(5) |Throttle position sensor 1 opening
angle — (Throttle position sensor 1
opening angle after passing amplifier) 1/4|
t 3 °
(6) Cruise control cancel signal at brake
ON
Cruise control cancel
signal OFF
(7) Brake switch 1, 2 signal
SW 1 and 2 are not
matched
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст