Subaru Legacy IV (2008 year). Service manual — part 464
EC(H6DO)-8
Purge Control Solenoid Valve
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
6. Purge Control Solenoid Valve
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the air intake chamber. <Ref. to
IN(H6DO)-7, REMOVAL, Air Intake Chamber.>
4) Disconnect the connector and hoses of purge
control solenoid valve, and then remove the purge
control solenoid valve.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
NOTE:
Connect the evaporation hose as shown in the fig-
ure.
C: INSPECTION
Make sure the hoses are not cracked or loose.
IN-00203
EC-02019
(A) To fuel pipe (evaporation line)
(B) To intake manifold
EC-02019
EC-02020
(B)
(A)
EC(H6DO)-9
Fuel Level Sensor
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
7. Fuel Level Sensor
A: REMOVAL
For removal procedure, refer to “FU(H6DO)” sec-
tion. <Ref. to FU(H6DO)-57, REMOVAL, Fuel Lev-
el Sensor.>
B: INSTALLATION
For installation procedure, refer to “FU(H6DO)”
section. <Ref. to FU(H6DO)-57, INSTALLATION,
Fuel Level Sensor.>
EC(H6DO)-10
Fuel Temperature Sensor
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
8. Fuel Temperature Sensor
A: REMOVAL
The fuel temperature sensor is integrated into fuel
level sensor as one unit; therefore, refer to “Fuel
Level Sensor” for removal procedure. <Ref. to
FU(H6DO)-57, REMOVAL, Fuel Level Sensor.>
B: INSTALLATION
The fuel temperature sensor and fuel level sensor
are integrated into one unit; therefore, refer to “Fuel
Level Sensor” for installation procedure. <Ref. to
FU(H6DO)-57, INSTALLATION, Fuel Level Sen-
sor.>
(A) Fuel temperature sensor
(A) Fuel temperature sensor
EC-02408
(A)
EC-02408
(A)
EC(H6DO)-11
Fuel Sub Level Sensor
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
9. Fuel Sub Level Sensor
A: REMOVAL
For removal procedure, refer to “FU(H6DO)” sec-
tion. <Ref. to FU(H6DO)-58, REMOVAL, Fuel Sub
Level Sensor.>
B: INSTALLATION
For installation procedure, refer to “FU(H6DO)”
section. <Ref. to FU(H6DO)-59, INSTALLATION,
Fuel Sub Level Sensor.>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст