Subaru Legacy III (2000-2003 year). Service manual — part 6
NT-6
NOTE
NOTE
• Chain direction at tie-down condition
• Chain pulling range at tie-down condition
• Vehicle sinking volume at tie-down condition
Measure distance L between tire highest point to
arch highest point before tie-down and after tie-
down. Difference of measurement value (drop
height) shall be within 50.8 mm (1.97 in). Make
sure to fix a vehicle securely.
7. TOWING
Avoid towing vehicles except when the vehicle can-
not be driven. For vehicles with AWD, AT or VTD,
use a loader instead of towing. When towing other
vehicles, to prevent excessive weight from damag-
ing the hook or vehicle:
• Do not tow other vehicles with a front towing
hook.
• Make sure the vehicle towing is heavier that the
vehicle being towed.
NT-00038
20˚
20˚
20˚
20˚
45˚
45˚
45˚
: Tie-down range
45˚
20˚
20˚
20˚
20˚
NT-00039
NT-00040
L
L
NT-7
NOTE
NOTE
8. FRONT HOOD STAY INSTALLATION
• At the check and general maintenance
• When wider hood opening is necessary
Set stay into the hole of hood inner as shown in the figure below.
NOTE:
Before setting the hood in this position, remove the windshield washer hose attaching clip from the hood.
9. TRAINING
For information about training, contact a dealer or
agent.
10.GENERAL SCAN TOOL
Using general scan tools will greatly improve effi-
ciency of repairing engine electronic controls. The
Subaru Select Monitor can be used to diagnose the
engine and also the ABS, the air conditioner, and
other parts.
NT-00041
NT-00042
NT-8
NOTE
NOTE
MEMO:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст