Subaru Legacy III (2000-2003 year). Service manual — part 945
GW-40
GLASS/WINDOWS/MIRRORS
WIPER DEICER SWITCH
MEMO
BODY STRUCTURE
BS
Page
General Description . . . . . . . . . . . . . . . . . . . . . 2
Datum Points. . . . . . . . . . . . . . . . . . . . . . . ...3
Datum Dimensions . . . . . . . . . . . . . . . . . . . . . 10
BS-2
BODY STRUCTURE
GENERAL DESCRIPTION
1. General Description
A: PREPARATION TOOL
TOOL NAME
REMARKS
Tram tracking gauge
Used for measuring dimen-
sion.
Tape measure
Used for measuring dimen-
sion
BS-3
BODY STRUCTURE
DATUM POINTS
2. Datum Points
A: LOCATION
NOTE:
• Datum points are specified for body repair.
• Guide holes, locators, and indents are provided to facilitate panel replacement and to increase alignment
accuracy.
• Both right and left reference points are symmetrical.
1. ROOM SECTION
(13) Front fener attaching hole at front
pillar center portion M6
(23) Rear quarter outer door switch
attaching hole 20 mm (0.79 in)
dia.
(87) Six light glass attaching hole 6.2
mm (0.244 in) dia.
(14) Front fender attaching hole at
front pillar lower portion M6
(88) Retainer attaching square hole at
side rail outer 8
×
8 mm (0.31
×
0.31 in)
(64) Center pillar (LWR) gauge hole 16
mm (0.63 in) dia.
(19) Retainer attaching hole at side rail
outer 3.2 mm (0.126 in) dia.
(81) Panel rear center (UPR) gauge
hole 8 mm (0.31 in) dia.
(89) Retainer attaching square hole at
rear quarter outer 8
×
8 mm (0.31
×
0.31 in)
(20) Center pillar outer hole 14 mm
(0.55 in) dia.
(82) Bulk head rear trim clip hole 7 mm
(0.28 in) dia.
(21) Front seat belt adjust plate attach-
ing hole M10
(92) Rear panel center hole (UPR) 6
mm (0.24 in) dia.
(85) Rear quarter outer gauge hole 20
mm (0.79 in) dia.
(22) Side sill outer hole 20 mm (0.79
in) dia.
BS-00064
(20)
(22)
(14)
(19)
(13)
(81)
(89)
(23)
(64)
(85)
(82)
(87)
(88)
(92)
(21)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст