Subaru Legacy III (2000-2003 year). Service manual — part 950
BS-20
BODY STRUCTURE
DATUM DIMENSIONS
MEMO:
INSTRUMENTATION/DRIVER INFO
IDI
Page
General Description . . . . . . . . . . . . . . . . . . . . . 2
Combination Meter System . . . . . . . . . . . . . . . . . . .4
Combination Meter Assembly . . . . . . . . . . . . . . . . ...14
Speedometer. . . . . . . . . . . . . . . . . . . . . . . .18
Tachometer . . . . . . . . . . . . . . . . . . . . . . . ...19
Fuel Gauge . . . . . . . . . . . . . . . . . . . . . . . ...20
Water Temperature Gauge . . . . . . . . . . . . . . . . . ...21
Ambient Sensor. . . . . . . . . . . . . . . . . . . . . . .22
IDI-2
INSTRUMENTATION/DRIVER INFO
GENERAL DESCRIPTION
1. General Description
A: SPECIFICATIONS
1. STANDARD METER
Combination meter
Speedometer
Electric pulse type
Temperature gauge
Cross coil type
Fuel gauge
Cross coil type
Tachometer
Electric pulse type
Turn signal indicator light
12 V — 1.4 W
Charge indicator light
12 V — 1.4 W
Oil pressure indicator light
12 V — 1.4 W
ABS warning light
12 V — 1.4 W
CHECK ENGINE warning light
(Malfunction indicator light)
12 V — 1.4 W
HI-beam indicator light
12 V — 1.4 W
Door open warning light
LED
Seat belt warning light
LED
Brake fluid and parking brake warning
light
12 V — 1.4 W
FWD indicator light
12 V — 1.4 W
AIRBAG warning light
12 V — 1.4 W
Meter illumination light
12 V — 3.4 W
AT OIL TEMP. warning light
12 V — 1.4 W
LO indicator light
12 V — 1.4 W
HOLD indicator light
12 V — 1.4 W
Immobiliser indicator light
LED
VDC warning light
12 V — 1.4 W
VDC function indicator light
12 V — 3 W
POWER indicator light
12 V — 1.4 W
VDC OFF indicator light
12 V — 1.4 W
Low fuel warning light
12 V — 1.4 W
AT select lever position indicator light
12 V — 100 mA
LCD back light
12 V — 1.4 W
IDI-3
INSTRUMENTATION/DRIVER INFO
GENERAL DESCRIPTION
2. LUMINESCENT METER
B: CAUTION
• Be careful not to damage meters and instrument panel.
• Be careful not to damage meter glasses.
• Make sure that electrical connector is connected securely.
• After installation, make sure that each meter operates normally.
• Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
• Do not apply excessive force to printed circuit.
• Do not drop or otherwise apply impact.
C: PREPARATION TOOL
1. GENERAL TOOLS
Combination meter
Speedometer
Electric pulse type
Water temperature gauge
Thermistor cross-coil type
Fuel gauge
Resistance cross-coil type
Tachometer
Electric pulse type
Turn signal indicator light
12 V — 1.4 W
Charge indicator light
12 V — 1.4 W
Oil pressure warning light
12 V — 1.4 W
ABS warning light
12 V — 1.4 W
Check engine warning light (Malfunc-
tion indicator light)
12 V — 1.4 W
HI-beam indicator light
12 V — 1.4 W
Door open warning light
12 V — 2.0 W (LCD back light)
Seat belt warning light
LED
Brake fluid and parking brake warning
light
12 V — 1.4 W
FWD indicator light
12 V — 1.4 W
AIRBAG warning light
12 V — 1.4 W
Meter illumination light
CFL (Cold cathode fluorescent light)
Meter ring light
12 V — 3.0 W, 2.0 W
AT OIL TEMP. warning light
12 V — 1.4 W
HOLD indicator light
12 V — 1.4 W
Immobilizer indicator light
LED
VDC warning light
12 V — 1.4 W
VDC function indicator light
12 V — 3 W
POWER indicator light
12 V — 1.4 W
VDC OFF indicator light
12 V — 1.4 W
Low fuel warning light
12 V — 1.4 W
AT select lever position indicator light
12 V — 150 mA
Lighting switch indicator light
12 V — 1.4 W
SPORT shift indicator
12 V - 3.0 W (LCD back light)
LCD back light
CFL (Cold cathode fluorescent light)
TOOL NAME
REMARKS
Circuit Tester
Used for measuring resistance and voltage.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст