Subaru Legacy III (2000-2003 year). Service manual — part 521
CS-4
CONTROL SYSTEMS
GENERAL DESCRIPTION
2. AT SELECT LEVER (SPORT SHIFT MODEL)
(1) Grip
(13) Detent spring
(25) Spacer
(2) Cover
(14) Tube
(26) Washer
(3) Indicator
(15) Clip
(27) Snap pin
(4) Blind
(16) Bushing
(28) Select cable
(5) Bulb
(17) Spring
(29) Nut A
(6) Guide plate
(18) Rod
(7) Lever
(19) Clip
Tightening torque: N·m (kgf-m, ft-lb)
(8) Spacer
(20) Base plate
T1: 2.0 (0.2, 1.4)
(9) Bracket guide
(21) Arm
T2: 7.5 (0.76, 5.5)
(10) Spring pin
(22) Bushing
T3: 13 (1.3, 9.4)
(11) Arm bracket
(23) Grommet
T4: 18 (1.8, 13.0)
(12) Detent arm
(24) Packing
( 1 )
( 2 )
( 3 )
( 4 )
( 5 )
( 6 )
T1
CS-00177
( 7 )
( 8 )
( 9 )
(10)
(12)
(15)
(16)
(19)
(20)
(13)
(14)
(11)
(17)
(18)
(19)
(23)
(21)
(24)
(25)
(26)
(27)
(28)
(29)
T1
T2
T4
T3
T4
T2
(22)
CS-5
CONTROL SYSTEMS
GENERAL DESCRIPTION
3. MT GEAR SHIFT LEVER
(1) Gear shift knob
(11) Bushing A
(21) Boot and insulator ASSY
(2) Console boot
(12) Spring pin
(22) Front cover
(3) Plate ASSY
(13) Cushion rubber
(23) Clamp
(4) Lever
(14) Bushing B
(5) Bushing
(15) Joint
Tightening torque: N·m (kgf-m, ft-lb)
(6) Bushing
(16) Rod
T1: 7.5 (0.76, 5.5)
(7) Lock wire
(17) Bracket
T2: 12 (1.2, 8.7)
(8) Boot
(18) Washer
T3: 18 (1.8, 13.0)
(9) Snap ring
(19) Stay
(10) O-ring
(20) Spacer
CS-00125
T2
(5)
(5)
(5)
(5)
(4)
(6)
(3)
(2)
(1)
(18)
(21)
(22)
(20)
(19)
(17)
T1
(14)
(13)
(16)
(15)
(12)
(12)
(11)
(10)
(10)
(9)
(8)
(7)
T3
T3
T3
T3
(23)
CS-6
CONTROL SYSTEMS
GENERAL DESCRIPTION
4. DRIVE SELECT LEVER
(1) Knob
(6) Spring
Tightening torque: N·m (kgf-m, ft-lb)
(2) Cushion
(7) Lever ASSY
T1: 1.6 (0.16, 1.2)
(3) Plate ASSY
(8) Clip
T2: 18 (1.8, 13.0)
(4) Bushing
(9) Clevis pin
(5) Cable
(10) Snap pin
CS-00178
( 1 )
( 2 )
( 3 )
( 4 )
( 5 )
( 6 )
( 7 )
( 8 )
( 9 )
(10)
T2
T2
T1
CS-7
CONTROL SYSTEMS
GENERAL DESCRIPTION
C: CAUTION
• Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust or dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly, and replacement.
• Use SUBARU genuine grease etc. or the equiv-
alent. Do not mix grease etc. with that of another
grade or from other manufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or safety stands at the specified
points.
• Apply grease onto sliding or revolution surfaces
before installation.
• Before installing O-rings or snap rings, apply suf-
ficient amount of grease to avoid damage and de-
formation.
• Before securing a part on a vise, place cushion-
ing material such as wood blocks, aluminum plate,
or shop cloth between the part and the vise.
• Before disconnecting electrical connectors, be
sure to disconnect ground cable from battery.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст