Subaru Legacy III (2000-2003 year). Service manual — part 831
PS-12
POWER ASSISTED SYSTEM (POWER STEERING)
GENERAL DESCRIPTION
3. OIL PUMP
NOTE:
The illustration except for 3.0 L and Turbo model is shown below. (Not shown for 3.0 L and Turbo model be-
cause it cannot be disassembled.)
(1) Pulley
(7) Cam ring
(13) Rear body
(2) Oil seal
(8) Circlip
(14) Pressure swtich
(3) Front casing
(9) Straight pin
(15) Connector
(4) O-ring
(10) Rotor
(5) Socket
(11) O-ring
Tightening torque: N·m (kgf-m, ft-lb)
(6) Pressure plate
(12) Seal ring
T1: 27.5 (2.8, 20.3)
T2: 63.5 (6.48, 47)
PS-00277
( 1 )
( 2 )
( 3 )
( 4 )
( 5 )
( 6 )
( 6 )
( 7 )
( 8 )
( 9 )
(10)
(11)
(11)
(12)
(13)
(14)
(15)
T2
T1
PS-13
POWER ASSISTED SYSTEM (POWER STEERING)
GENERAL DESCRIPTION
C: CAUTION
• This section includes Airbag related repair
works. For those corresponding to the repair proce-
dures, read carefully CAUTION items in AB section
before working and be sure to follow the instruc-
tions.
• Wear working clothing, including a cap, protec-
tive goggles, and protective shoes during opera-
tion.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust or dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Be careful not to burn your hands, because each
part on the vehicle is hot after running.
• Use SUBARU genuine steering fluid, grease etc.
or the equivalent. Do not mix steering fluid, grease
etc. with that of another grade or from other manu-
facturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or safety stands at the specified
points.
• Apply steering fluid onto sliding or revolution sur-
faces before installation.
• Before installing O-rings or snap rings, apply suf-
ficient amount of steering fluid to avoid damage
and deformation.
• Before securing a part on a vise, place cushion-
ing material such as wood blocks, aluminum plate,
or shop cloth between the part and the vise.
PS-14
POWER ASSISTED SYSTEM (POWER STEERING)
GENERAL DESCRIPTION
D: PREPARATION TOOL
1. SPECIAL TOOLS
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
925700000
WRENCH
• Used for removing and installing tie-rod.
• Apply this tool to rack.
925711000
PRESSURE
GAUGE
Used for measuring oil pump pressure.
926200000
STAND
Used when inspecting characteristic of gearbox
assembly and disassembling it.
34099AC010
ADAPTER HOSE A
Used with PRESSURE GAUGE (925711000).
ST-925700000
ST-925711000
ST-926200000
ST34099AC010
PS-15
POWER ASSISTED SYSTEM (POWER STEERING)
GENERAL DESCRIPTION
34099AC020
ADAPTER HOSE B
Used with PRESSURE GAUGE (925711000).
926230000
SPANNER
• For the lock nut when adjusting backlash of
gearbox.
• Measurement of rotating resistance of gear-
box assembly.
34199AE020
MOUNT
Used for disassembling oil pump.
34199AE030
INSTALLER
Used for installing oil seal into oil pump.
ILLUSTRATION
TOOL NUMBER
DESCRIPTION
REMARKS
ST34099AC020
ST-926230000
ST34199AE020
ST34199AE030
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст