Subaru Ascent (2019 year). Instruction — part 31
(483,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
&
Engine
Engine model
FA24
(2.4 L, DOHC, turbo)
Engine type
Horizontally opposed, liquid cooled 4 cylinder, 4-stroke direct injection gasoline engine
Displacement cu-in (cc)
146 (2,387)
Bore 6 Stroke in (mm)
3.70 6 3.39 (94.0 6 86.0)
Compression ratio
10.6 : 1
Firing order
1 – 3 – 2 – 4
&
Fuel
Fuel requirement
Fuel tank capacity
Unleaded gasoline with 87 AKI (90 RON) or higher
19.3 US gal (73 liters, 16.1 Imp gal)
For more details, refer to “Fuel” FP311.
– CONTINUED –
Specifications
481
12
Specifications
(484,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
&
Engine oil
For the checking, adding and replacing procedure or other details, refer to “Engine oil” FP444.
NOTE
The procedure for changing the engine oil and oil filter should be performed by a properly-trained expert. It is recommended
that you have this service performed by your SUBARU dealer.
!
Approved engine oil
Always use the SUBARU approved engine oil. For further details, please contact your SUBARU dealer.
If the approved engine oil is unavailable, use the alternative engine oil described on the next page.
Specifications
482
(485,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
!
Alternative engine oil
If the SUBARU approved oil is unavailable, the following alternative oil can be used.
NOTE
Each quantity indicated here is only a guideline. The necessary quantity for replacement may differ slightly depending on the
temperature and other factors.
Oil grade
SAE viscosity No. and
applicable temperature
Engine oil capacity
API (American Petroleum Insti-
tute) classification SN with the
words “RESOURCE CONSER-
VING”
or
ILSAC (International Lubricant
Specification Advisory Commit-
tee) GF-5, which can be identi-
fied with the ILSAC certification
mark (Starburst mark)
0W-20 synthetic oil is the required oil
for optimum engine performance and
protection. Conventional oil may be
used if synthetic oil is unavailable.
*: If 0W-20 synthetic oil is not available,
5W-30 conventional oil may be used if
replenishment is needed but should be
changed to 0W-20 synthetic oil at the
next oil change.
– Adding the oil from low level to
full level:
1.1 US qt (1.0 liter, 0.9 Imp qt)
– Changing the oil and oil filter:
4.8 US qt (4.5 liters, 4.0 Imp qt)
– CONTINUED –
Specifications
483
12
Specifications
(486,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
&
Front differential and rear differential gear oil
Oil
Front differential gear oil
Rear differential gear oil
Oil grade
.
SUBARU Extra MT*
3
.
API classification GL-5
(75W-90)
SAE viscosity No. and applicable
temperature
Oil capacity*
1
1.3 US qt (1.2 liters, 1.1 Imp qt)
0.8 US qt (0.8 liters, 0.7 Imp qt)
Remarks*
2
“Front differential gear oil and rear differential gear oil” FP451
*1: The indicated oil quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other
factors. After refilling the gearbox with oil, the oil level should be checked.
*2: For more details about maintenance and service, refer to the indicated section.
*3: The vehicle is filled at the factory with this type of oil.
*4: Continuously variable transmission type TR690SXXXX (To check the model number for the Continuously variable transmission type, refer to “Vehicle
identification” FP495.)
*5: Continuously variable transmission type TR690GXXXX (To check the model number for the Continuously variable transmission type, refer to “Vehicle
Specifications
484
(487,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
&
Fluids
Fluid
Fluid type*
1
Fluid capacity*
2
Remarks*
3
Continuously variable
transmission fluid
Consult your SUBARU dealer.
Models with air-cooled continuously variable transmission fluid
cooler: 12.7 US qt (12.0 liters, 10.6 Imp qt)*
4
Models without air-cooled continuously variable transmission fluid
cooler: 12.3 US qt (11.6 liters, 10.2 Imp qt)*
5
“Continuously variable
transmission fluid” FP450
Brake fluid
FMVSS No. 116, DOT 3
or DOT 4 brake fluid
–
*1: Use one of the indicated types of fluid.
*2: The indicated fluid quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other
factors.
*3: For more details about maintenance and service, refer to the indicated section.
*4: Continuously variable transmission type TR690SXXXX (To check the model number label for the continuously variable transmission type, refer to
“Vehicle identification” FP495.)
*5: Continuously variable transmission type TR690GXXXX (To check the model number label for the continuously variable transmission type, refer to
“Vehicle identification” FP495.)
&
Engine coolant
Coolant capacity
Coolant type
11.7 US qt (11.1 liters, 9.8 Imp qt)
SUBARU Super Coolant
The indicated coolant quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other
factors. For more details about maintenance and service, refer to “Cooling system” FP446.
– CONTINUED –
Specifications
485
12
Specifications
(488,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
&
Electrical system
Battery type
75D23L
Alternator
12V-190A
Spark plugs
SILKFR8A6 (NGK)
&
Tires
Tire size
245/60R18 105H
245/50R20 102H
Wheel size
18 6 7.5 J
20 6 7.5 J
Pressure
Front
35 psi (240 kPa, 2.4 kgf/cm
2
)
33 psi (230 kPa, 2.3 kgf/cm
2
)
Rear
35 psi (240 kPa, 2.4 kgf/cm
2
)
33 psi (230 kPa, 2.3 kgf/cm
2
)
Wheel nut tightening torque
89 lbf·ft (120 N·m, 12 kgf·m)*
1
*1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts
by yourself, have the tightening torque checked at the nearest automotive service facility as soon as possible. For the wheel nut tightening procedure,
refer to “Changing a flat tire” FP412.
&
Temporary spare tires
Temporary spare tire size
T165/90 D18
Temporary spare tire inflation pressure
(recommended cold tire inflation pressure)
60 psi (420 kPa, 4.2 kgf/cm
2
)
Specifications
486
(489,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
&
Brake pedal
in (mm)
Pedal clearance
2.68 (68)*
1
Pedal free play
0.016 - 0.07 (0.4 - 1.8)
*1: Minimum value when pedal is operated with a force of 110 lbf (490 N, 50 kgf)
&
Brake disc
If you need information on the usage limit value of brake discs and the method for measuring them, we recommend that you consult your
SUBARU dealer.
&
Brake pad
in (mm)
Brake pad wear limit
Front
0.063 (1.6)
Rear
0.059 (1.5)
Specifications
487
12
Specifications
(490,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
12-2. Fuses and circuits
&
Fuse panel located in the passenger compartment
Fuse
panel
Fuse
rating
Circuit
1
Empty
2
20A
CIGAR
3
7.5A
IG A-1
4
15A
AUDIO NAVI
5
15A
IG B-2
6
Empty
7
Empty
8
15A
A/C IG
9
7.5A
ACC
10
7.5A
IG B-1
11
Empty
12
Empty
13
7.5A
IG A-3
14
10A
UNIT +B
15
7.5A
METER IG
16
Empty
17
7.5A
MIRROR
18
7.5A
LAMP IG
19
10A
IG A-2
20
10A
SRS AIR BAG
Fuses and circuits
488
(491,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
Fuse
panel
Fuse
rating
Circuit
21
Empty
22
15A
STRG/H
23
10A
DRL
24
Empty
25
Empty
26
10A
BACK UP
27
15A
SEAT HTR F
28
15A
TRAIL
29
Empty
30
Empty
31
Empty
32
7.5A
ILLUMI
33
7.5A
KEY SW A
34
Empty
35
Empty
36
7.5A
KEY SW B
37
7.5A
STOP
38
7.5A
EYE SIGHT
– CONTINUED –
Fuses and circuits
489
12
Specifications
(492,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
&
Fuse panel located in the engine compartment
A)
Main fuse
Fuse
panel
Fuse
rating
Circuit
1
7.5A
HORN HI
2
7.5A
HORN LO
3
15A
H/L LO RH
4
15A
H/L LO LH
5
10A
DCM
6
10A
H/L HI RH
7
10A
H/L HI LH
8
10A
TAIL
9
30A
JB-B
10
25A
FUEL
11
7.5A
OBD
12
10A
ODS
13
7.5A
PU B/UP
14
15A
HAZARD
15
Empty
16
10A
MB-B
17
20A
SOCKET
18
20A
D/L
19
15A
ETC
20
10A
E/G2
21
7.5A
CVT SSR
Fuses and circuits
490
(493,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
Fuse
panel
Fuse
rating
Circuit
22
20A
DI
23
Empty
24
20A
O2 HTR
25
Empty
26
20A
TCU
27
15A
IG COIL
28
15A
E/G1
29
30A
BACKUP
30
15A
R_S/H
31
30A
VDC SOL
32
15A
F. FOG
33
30A
R. DEF
34
20A
AUDIO
35
15A
DEICER
36
Empty
37
20A
BLOWER
38
20A
BLOWER
39
Empty
40
15A
R. WIPER
41
15A
F. WASH
42
30A
F. WIPER
43
Empty
44
Empty
Fuses and circuits
491
12
Specifications
(494,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
12-3. Bulb chart
&
Safety precautions
WARNING
Bulbs may become very hot while
illuminated. Before replacing bulbs,
turn off the lights and wait until the
bulbs cool down. Otherwise, there is
a risk of sustaining a burn injury.
CAUTION
Replace any bulb only with a new
bulb of the specified wattage. Using
a bulb of different wattage could
result in a fire.
Bulb chart
492
(495,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
&
Bulb chart
NOTE
Lights A, B, C, D, E, F and G are the LED (Light Emitting Diode) type. Consult your SUBARU dealer for replacement.
– CONTINUED –
Bulb chart
493
12
Specifications
(496,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
Wattage
Bulb No.
1)
Front turn signal light (models with halogen headlight)
12V-28W
7444NA
2)
Front turn signal light (models with LED headlight)
12V-28W
7444NA
High beam headlight (models with halogen headlight)
12V-60W
HB3
3)
Low beam headlight (models with halogen headlight)
12V-55W
H11
4)
Vanity mirror light
14V-1.4W
–
5)
Map lights
12V-8W
–
6)
Rear reading light (if equipped)
12V-8W
–
7)
Rear turn signal light
12V-21W
WY21W
8)
Rear side marker light
12V-5W
W5W
9)
Door step light (if equipped)
12V-5W
–
10) Backup light
12V-16W
W16W
11) License plate light
12V-5W
W5W
12) Cargo area light
12V-5W
–
A)
Low and high beam headlight (models with LED headlight)
–
–
B)
Side turn signal light (if equipped)
–
–
C)
High-mounted stop light
–
–
D)
Stop light/Tail light
–
–
E)
Front side marker light
–
–
F)
Front position light/Daytime running light
–
–
G)
Front fog light (if equipped)
–
–
Bulb chart
494
(497,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
12-4. Vehicle identification
1)
Emission control label
2)
Tire inflation pressure label
3)
Certification label
4)
Vehicle identification number plate
5)
Model number label
6)
Fuel label
7)
Air conditioner label
Vehicle identification
495
12
Specifications
(499,1)
北米Model "A3200BE-A" EDITED: 2018/ 3/ 5
13-1. For U.S.A. . . . . . . . . . . . . . .. 498
13-2. Tire information . . . . . . . . . . . 498
Tire labeling . . . . . . . . . . . . . ... 498
Recommended tire inflation pressure. . . . .. 500
Glossary of tire terminology . . . . . . . ... 501
Tire care – maintenance and safety practices . .. 506
Determining compatibility of tire and vehicle
load capacities . . . . . . . . . . . . . 506
Adverse safety consequences of overloading
on handling and stopping and on tires. . . .. 506
Steps for Determining Correct Load Limit . . ... 507
13-3. Vehicle load limit – how to determine . . .507
Calculating total and load capacities varying
seating configurations. . . . . . . . . .. 508
13-4. Uniform tire quality grading standards . ...510
TREADWEAR . . . . . . . . . . . . . . 511
TRACTION AA, A, B, C . . . . . . . . . ... 511
TEMPERATURE A, B, C . . . . . . . . . .. 511
13-5. Reporting safety defects (U.S.A.). . . . .512
Consumer information and reporting safety defects
13
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст