Subaru WRX STI (2019 year). Instruction — part 12
(185,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
market and vehicle specifications.
Multi-function display
1)
Clock
2)
Climate control (displayed only when the
ignition switch is in the “ON” position)
3)
Outside temperature
4)
Information screen
NOTE
The outside temperature indicator
shows the temperature around the
sensor. Therefore, the temperature in-
dication may differ from the actual
outside air temperature.
&
Welcome screen
When the driver’s door is closed, the
welcome screen will appear for a short
time.
NOTE
.
The welcome screen will disappear
when the ignition switch is turned to the
“ON” position while the welcome
screen is displayed.
.
You can set the welcome screen to
on or off. For details, refer to “Bypass
screen setting” F3-57.
.
For a certain period of time after the
welcome screen has once appeared, it
may not appear again even when the
driver’s door is closed again. This does
not indicate a malfunction.
&
Self-check screen
When the ignition switch is turned to the
“ON” position, the vehicle self-check will
be performed. The screens corresponding
to the following items will appear one after
another for several seconds each.
1)
Inspection and maintenance: Checks the
interval of inspection and maintenance.
2)
Engine oil: Checks the interval of engine
oil replacement.
3)
Oil filter: Checks the interval of oil filter
replacement.
4)
Tires: Checks the interval of tire rotation.
When the checks are performed, the color
of the icon corresponding to the checked
item will turn as follows:
.
If the checked item has no notifications,
it turns green.
.
If the checked item has any mainte-
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-45
3
(186,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
nance notifications, it turns yellow.
If there is a notification, the message will
be displayed. Take the appropriate actions
based on the message indicated.
NOTE
.
You can set the self-check screen to
on or off. The default setting is off. For
details, refer to “On/Off setting” F3-59.
.
After performing the maintenance,
change the setting of the correspond-
ing maintenance item. For details, refer
to “Maintenance settings” F3-58.
.
The maintenance notification screen
will be displayed under either of the
following conditions.
– The period of time remaining until
the registered notification date is 15
days or less.
– The total driving distance remain-
ing until the registered notification
distance is approximately 311 miles
(500 km) or less.
.
The maintenance notification screen
will be displayed until either of the
following conditions is satisfied.
– The period of time passed after
the registered notification date is 15
days or more.
– The total distance driven after the
registered notification distance is
approximately 311 miles (500 km) or
more.
&
Interruption screen
Useful messages, such as reminder in-
formation, vehicle information, warning
information, etc. may interrupt the current
screen and appear on the display accom-
panied by a beep. Take proper action
according to the message.
The warning screen will return to the
original screen after a few seconds.
&
Basic operation
Control switch (type A)
Control switch (type B)
1)
Up (select)
2)
ENTER (push)
3)
Down (select)
Instruments and controls/Multi-function display (color LCD)
3-46
(187,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
By operating “
” or “
” of the control
switch, the screens and selection items
can be switched. When the ENTER button
is pushed, the item can be selected and
set.
&
Basic screens
!
Climate control screen
Climate control screen
1)
Set temperature indicator (left-hand side)
2)
FULL AUTO indicator
3)
AUTO indicator
4)
Airflow mode indicator
5)
Set temperature indicator (right-hand
side)
6)
Air inlet selection indicator
7)
Fan speed indicator
8)
Air conditioner ON indicator
When operating the climate control sys-
tem, the basic screen will change to the
climate control screen. For details about
the climate control system, refer to “Cli-
mate control” F4-1.
!
Information screen
Operate the “
” or “
” of the control
switch to select the screen that is always
displayed on.
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-47
3
(188,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
Content
Description
Page
Fuel consumption screen
Displays fuel consumption screen.
Triple meter screen
Displays up to 3 optional items.
Prevention safety screen
Displays the status of your vehicle.
Boost pressure screen
Displays the boost pressure, etc.
Guidance screen
Enters the setting screen
Clock/calendar screen
Displays the clock/calendar.
!
Fuel consumption screen
1)
Average fuel consumption corresponding
to the driving distance of each trip meter
2)
Current fuel consumption
3)
Driving range on remaining fuel
NOTE
The driving range on the remaining fuel
is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
warning light illuminates.
Instruments and controls/Multi-function display (color LCD)
3-48
(189,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
!
Triple meter screen
Triple meter screen (display example)
From the following pieces of information,
you can select up to three items to be
displayed.
Item
Details
Engine oil temperature (except
STI)
Average vehicle speed
Accelerator opening ratio
Item
Details
Vehicle posture
Average fuel consumption cor-
responding to the driving dis-
tance of the odometer
Boost pressure
Journey distance (the distance
that has been driven since the
ignition switch was turned to
the “ON” position)
Average fuel consumption for
the entire driving distance from
when the ignition switch was
turned to the “ON” position
!
Prevention safety screen
1)
Telltale screen
2)
Steering angle
3)
Vehicle posture
4)
Running condition
For functions that are operating, the
corresponding indicator will illuminate or
flash.
NOTE
The vehicle posture indication may
differ from the actual vehicle posture.
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-49
3
(190,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
!
Boost pressure screen
1)
The peak value of the boost pressure
(digital display)
2)
Boost pressure (analog display)
3)
Accelerator opening ratio (digital display)
4)
Accelerator opening ratio (analog dis-
play)
5)
The peak value of the boost pressure
(analog display)
6)
Boost pressure (digital display)
You can reset the peak value of the boost
pressure. Press the ENTER button to
enter the reset screen.
Select “Yes” to reset the peak value. Select
“No” to keep the current park value.
!
Guidance screen
Guidance screen (display example)
Press and hold the ENTER button to enter
the setting screen. For details, refer to
“Setting screen” F3-52.
Instruments and controls/Multi-function display (color LCD)
3-50
(191,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
!
Clock/calendar screen
Clock
Calendar
You can select the clock or calendar to be
displayed. You can also turn the screen off.
For the setting procedure, refer to “Clock
setting” F3-57.
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-51
3
(192,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
&
Setting screen
Push and hold the ENTER button to display the setting screen. Select the preferred menu by operating the “
” or “
” switch.
Top menu
Menu option
Description
Page
Time/Date
Date
Set and adjust the date. 12h or 24h format can be selected.
Birthday
Set a birthday. (max. 5)
Anniversary
Set an anniversary day. (max. 5)
Daylight Saving Time
Turn the daylight saving time on or off
Go Back
Return to the top menu.
—
Display
Contrast
Adjust the contrast.
+5 ↔ −5
Screen Off
Turn the screen on or off.
On/Off
Beep
Adjust the beep sound volume.
High/Low/Off
Go Back
Return to the top menu.
—
Screen
Setting
Triple Meter
Set and customize the triple meter.
Clock
Select the clock format.
Analog Clock/Calendar/Off
Bypass Screen
Set the bypass screen for each item.
On/Off
Languages
Select the display language.
English or French or Spanish
(U.S.-spec. models only)
Camera Shift Link
*1
Set the front view monitor
On/Off
Go Back
Return to the top menu.
—
Instruments and controls/Multi-function display (color LCD)
3-52
(193,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
Top menu
Menu option
Description
Page
Mainte-
nance
Maintenance Schedule
Set and adjust the vehicle maintenance notification date.
Engine Oil
Set and adjust the oil maintenance notification date.
Oil Filter
Set and adjust the oil filter maintenance notification date.
Tires
Set and adjust the tire maintenance notification date.
On/Off
Turn on or off the self-check screen that is activated
when the ignition switch is turned to the “ON” position.
On/Off
Clear All Settings
Clear all items to the factory default settings.
Yes/No
Go Back
Return to the top menu.
—
Driving
History
Set
Register and overwrite the driving record.
Go Back
Return to the top menu.
—
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-53
3
(194,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
Top menu
Menu option
Description
Page
Car Setting
Keyless Buzzer Volume
Set the audible signal volume.
0 (OFF) to 7
Hazard Warning Flasher
Set the hazard warning flasher.
On/Off
Defogger
Set and customize the operation of the defogger.
15 minutes/Continuous
Interior Light
Set and customize the interior light off delay timer.
10, 20, 30 seconds/Off
Auto Light Sensor
*1
Set and customize the sensitivity of the auto light
sensor.
Low/Mid/High/Max
Keyless Access Setting
Driver’s Door Unlock
*1
Set and customize the keyless access function.
Driver’s Door Only/All
Welcome Lighting
Set the leaving time and approaching time.
30, 60, 90 seconds/Off
Go Back
Return to top menu.
—
Initialize
Reset to Defaults
Reset all settings to the default settings.
Yes/No
Lifetime Fuel Cons Reset
Clear logged lifetime fuel consumption data.
Yes/No
Go Back
Return to the top menu.
—
Go Back
—
Return to the top menu.
—
*1: If equipped
Instruments and controls/Multi-function display (color LCD)
3-54
(195,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
!
Date and time settings
If a birthday or anniversary is approaching,
a message will be displayed when turning
the ignition switch to the “ON” position. You
can set this function to on or off. For
details, refer to “Bypass screen setting”
F3-57.
!
Current date and time setting
For details about clock setting, refer to
“Clock” F3-64.
!
Birthday setting
1. Select “Birthday” from the 2nd menu in
the setting screen. Refer to “Setting
screen” F3-52.
2. Select from the list the number that you
want to register.
3. Enter the date and the text by using the
control switches.
4. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
NOTE
You can store a maximum of 5 birth-
days.
!
Anniversary setting
The setting procedure is the same as
“Birthday setting” F3-55, but select the
“Anniversary” item in step 1.
NOTE
You can store a maximum of 5 anniver-
saries.
!
Daylight saving time setting
1. Select “Daylight Saving Time” from the
2nd menu in the setting screen. Refer to
“Setting screen” F3-52.
2. Select “On” or “Off” by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-55
3
(196,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
!
Display/Beep settings
You can set the display settings and
volume settings.
!
Contrast setting
1. Select “Contrast” from the 2nd menu in
the setting screen. Refer to “Setting
screen” F3-52.
2. Select the contrast level by using the
control switches.
3. Press the ENTER button to confirm the
setting.
!
Screen OFF setting
1. Select “Screen Off” from the 2nd menu
in setting screen. Refer to “Setting screen”
F3-52.
2. Press the ENTER button to turn off the
screen.
Restoring the screen
When operating the control switches with
the ignition switch in the “ON” or “ACC”
position, the screen will be restored. The
screen will be restored with the basic
screen that was displayed when the
screen was turned off.
NOTE
While the screen is off, the screen
switches to the climate control screen
only when the air conditioner is operat-
ing.
!
Beep setting
1. Select “Beep” from the 2nd menu in the
setting screen. Refer to “Setting screen”
F3-52.
2. Set the beep volume by using the
control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
Instruments and controls/Multi-function display (color LCD)
3-56
(197,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
!
Screen settings
!
Triple meter setting
1. Select the “Triple Meter” from the 2nd
menu in setting screen. Refer to “Setting
screen” F3-52.
2. Set the desired items by using the
control switches. For details about items,
refer to “Triple meter screen” F3-49.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
NOTE
.
You can display a maximum of the 3
items.
.
The same item cannot be selected
for the left, center or right location.
!
Clock setting
1. Select “Clock” from the 2nd menu in
the setting screen. Refer to “Setting
screen” F3-52.
2. Select “Analog Clock”, “Calendar” or
“Off” by using the control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
!
Bypass screen setting
1. Select “Bypass Screen” from the 2nd
menu in the setting screen. Refer to
“Setting screen” F3-52.
2. Select “On” or “Off” to turn the display
of items on or off by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-57
3
(198,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
!
Language setting
1. Select “Languages” from the 2nd menu
in the setting screen. Refer to “Setting
screen” F3-52.
2. Select the preferred language by using
the control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
!
Camera shift link setting (if
equipped)
1. Select “Camera Shift Link” from the
2nd menu in the setting screen. Refer to
“Setting screen” F3-52.
2. Select “On” or “Off” by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
!
Maintenance settings
You can set maintenance reminders.
!
Engine oil setting
1. Select “Engine Oil” from the 2nd menu
in the setting screen. Refer to “Setting
screen” F3-52.
2. Set the date and distance of the
reminder by using the control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
Instruments and controls/Multi-function display (color LCD)
3-58
(199,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
NOTE
.
The reminder will be displayed by
either date or distance in accordance
with the setting.
.
Even when either “Day” or “Dis-
tance” are displayed as “_ _” a pop-up
screen will appear.
.
The reminder will be displayed until
either of the following conditions is
satisfied.
– The period of time passed after
the registered notification date is 15
days or more.
– The total distance driven after the
registered notification distance is
approximately 311 miles (500 km) or
more.
!
Oil filter setting
The setting procedure is the same as
“Engine oil setting” F3-58, but select the
“Oil Filter” item in step 1.
!
Tires setting
The setting procedure is the same as
“Engine oil setting” F3-58, but select the
“Tires” item in step 1.
!
Maintenance schedule setting
The setting procedure is the same as
“Engine oil setting” F3-58, but select the
“Maintenance Schedule” item in step 1.
!
On/Off setting
1. Select “On/Off” from the 2nd menu on
the setting screen. Refer to “Setting
screen” F3-52.
2. Select “On” or “Off” to turn the opening
screen on or off by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
– CONTINUED –
Instruments and controls/Multi-function display (color LCD)
3-59
3
(200,1)
北米Model "A1720BE-A" EDITED: 2018/ 3/ 9
!
Clear setting
1. Select “Clear All Settings” from the 2nd
menu on the setting screen. Refer to
“Setting screen” F3-52.
2. Select “Set” to clear the settings.
Select “Go Back” to return to the previous
screen without clearing the settings.
!
Driving history setting
You can register the items in the driving
history.
1. Select “Driving History” from the top
menu in the setting screen. Refer to
“Setting screen” F3-52.
2. Select one of the registration lines by
using the control switches.
3. Select “Set” to overwrite the previous
registration. Select “Go Back” to return to
the previous screen without overwriting
the previous registration.
Instruments and controls/Multi-function display (color LCD)
3-60
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст