Subaru Forester (2019). Instruction — part 23
(189,1)
switch is pushed and held, we
recommend that you have your
vehicle inspected at a SUBARU
dealer as soon as possible.
The Auto Start Stop warning light will
illuminate in yellow if you open the engine
hood when the engine has been tempora-
rily stopped by the Auto Start Stop system.
In this case, to ensure safety, the engine
will not be automatically restarted, even if
you release the brake pedal. Use normal
operation to restart the engine.
!
Auto Start Stop OFF indicator light
(yellow)
This light will illuminate in yellow when the
Auto Start Stop OFF switch is pressed to
prevent the Auto Start Stop system from
operating. It will turn off when the Auto
Start Stop OFF switch is pressed once
more to enable operation of the Auto Start
Stop system.
&
Auto Start Stop indica-
tor light (green)
This indicator light illuminates when the
engine has been temporarily stopped by
the Auto Start Stop system. It will turn off
when the engine is restarted.
&
Auto Start Stop No
Activity Detected indi-
cator light
When a vehicle is stopped, the indicator
light illuminates when the operating con-
dition of idling stop are not meet. The light
will turn off when the vehicle starts driving.
Refer to “Non-operational conditions”
FP340.
&
X-MODE indicator light (if
equipped)
X-MODE indicator (type A)
X-MODE indicator (type B)
1)
X-MODE indicator or D.SNOW/MUD
mode indicator
2)
SNOW/DIRT mode indicator
This indicator appears while the X-MODE
is activated. It will disappear when the X-
MODE is deactivated. Refer to “To acti-
vate/deactivate the X-MODE” FP327.
&
Hill descent control in-
dicator light (if
equipped)
This indicator appears while the hill des-
cent control function is in standby. It will
flash while the hill descent control function
is operating. It will disappear when the hill
descent control function is not available.
Refer to “Hill descent control function”
FP329.
– CONTINUED –
Warning and indicator
187
3
Instruments
and
controls
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(190,1)
&
BSD/RCTA warning
light (if equipped)
This warning indicator appears when the
BSD/RCTA is malfunctioning. In this case
the BSD/RCTA warning indicator will be
shown on the combination meter display
(color LCD). When this indicator appears,
have your vehicle inspected by your
SUBARU dealer as soon as possible.
&
BSD/RCTA OFF indica-
tor light (if equipped)
The indicator appears when the BSD/
RCTA OFF switch is pressed to deactivate
the BSD/RCTA or when the BSD/RCTA is
suspended temporarily. In this case the
BSD/RCTA OFF indicator will be shown on
the combination meter display (color
LCD). For details, refer to “BSD/RCTA”
FP351.
&
RAB warning light (if
equipped)
This indicator illuminates if the Reverse
Automatic Braking System malfunctions.
Refer to “Reverse Automatic Braking
System” FP360.
&
RAB OFF indicator light
(if equipped)
This indicator illuminates when the Re-
verse Automatic Braking System is turned
OFF, or when the Reverse Automatic
Braking System is suspended temporarily.
Refer to “Reverse Automatic Braking
System” FP360.
&
Driver Monitoring Sys-
tem operation indicator
light (green)/Driver
Monitoring System
warning light (yellow) (if
equipped)
!
Driver Monitoring System operation
indicator light (green)
This indicator illuminates when the Driver
Monitoring System is activated. Refer to
“Driver Monitoring System operation in-
dicator light (green)” FP377.
!
Driver Monitoring System warning
light (yellow)
This warning illuminates if the Driver
Monitoring System malfunctions. Have
your vehicle inspected at a SUBARU
dealer as soon as possible.
&
Driver Monitoring Sys-
tem OFF indicator light
(if equipped)
This indicator illuminates when the Driver
Monitoring System OFF switch is pressed
to deactivate the Driver Monitoring Sys-
tem. Refer to the “Driver Monitoring
System OFF indicator light” FP377.
&
Driver Monitoring Sys-
tem temporary stop in-
dicator light (if
equipped)
This indicator illuminates when the Driver
Monitoring System is temporarily stopped.
Refer to “Driver Monitoring System tem-
porary stop indicator light” FP377.
NOTE
The Driver Monitoring System stops
temporarily in the following circum-
stances.
.
The temperature of the Driver Mon-
itoring System unit is high.
Warning and indicator
188
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(191,1)
&
Icy road surface warn-
ing light (if equipped)
When the outside temperature is 378F
(38C) or less, the icy road surface warning
will illuminate to inform the driver that the
road surface may be frozen.
NOTE
.
The outside temperature indicator
shows the temperature in the area
around the sensor. Therefore, the tem-
perature indication may differ from the
actual outside air temperature.
.
The icy road surface warning screen
should be treated only as a guide. Be
sure to check the condition of the road
surface before driving.
.
Once the icy road surface warning
screen appears, it will not disappear
unless the outside temperature has
increased to 418F (58C) or higher.
3-7. Combination meter dis-
play (color LCD) (if equipped)
WARNING
Always pay adequate attention to
safe driving when operating the
combination meter display (color
LCD) while the vehicle is in motion.
When operation of the combination
meter display (color LCD) interferes
with your ability to concentrate on
driving, stop the vehicle before
performing operations on the
screen. Also, do not concentrate on
the display while driving. Doing so
may cause you to look away from the
road and could result in an accident.
Various information will be shown on the
combination meter display (color LCD).
Also, a warning message will appear on
the display if a malfunction is detected. In
addition, several settings for the displayed
content can be performed.
Combination meter display (color LCD)
1)
ECO gauge (refer to “ECO gauge”
FP162.)
2)
Warning screen (refer to “Warning
screen” FP191.)/Basic screen (refer to
“Basic screens” FP193.)
3)
EyeSight screen
4)
Cruise control information display
– CONTINUED –
Combination meter display (color LCD)
189
3
Instruments
and
controls
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(192,1)
5)
Telltale screen (refer to “Telltale screen”
FP191.)
6)
Select lever/gear position indicator (refer
to “Select lever/gear position indicator”
FP184.)
7)
X-MODE indicator (if equipped) (refer to
“X-MODE indicator light” FP187.) SI-
DRIVE indicator (refer to “SI-DRIVE
indicator light” FP184.)
8)
Odometer (refer to “Odometer” FP161.)/
double trip meter (refer to “Double trip
meter” FP161.)
9)
Fuel gauge (refer to “Fuel gauge”
FP162.)
A:
Deactivating the Eyesight system or
models without EyeSight system
B:
Activating the Eyesight system
&
Basic operation
Control switch
1)
(Up)
2)
/SET (enter)
3)
(Down)
By operating “
” or “
” of the control
switch, the screens and selection items
can be switched. When the “
/SET”
switch is pulled toward you, the item can
be selected and set.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
The warning screen will return to the
original screen after a few seconds. While
the “
” information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with “
” on the display,
pull the “
/SET” switch on the steering
wheel toward you.
NOTE
When the multi-function display (color
LCD) is set to the setting screen, the
combination meter display (color LCD)
cannot be controlled pressing on the
“
”, “
” and “
/SET” on the control
switch.
&
Welcome screen (opening
animation) and Good-bye
(ending animation) screen
When the driver’s door is opened and
closed after unlocking the door, the wel-
come screen (opening animation) will
appear on the combination meter display
(color LCD) for approximately 20 seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the combination
meter display (color LCD) gradually turns
off by showing Good-bye screen (ending
animation).
Combination meter display (color LCD)
190
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(193,1)
NOTE
.
The welcome screen and the good-
bye screen may differ in the actual
words and appearance.
.
The basic screen will be shown
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
.
Once the welcome screen appears, it
takes a certain period of time to display
it again.
.
If the ignition switch is operated
after unlocking the driver’s door, the
welcome screen will not appear even
when the driver’s door is opened and
closed.
.
The welcome screen will disappear
when you lock the driver’s door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the wel-
come screen is displayed.
.
The welcome screen including the
multi-function display (color LCD) and
the audio/navigation unit can be set to
on or off.
.
The welcome screen can be set to on
or off. For details, refer to “Welcome
Screen” FP195.
.
The Good-bye screen can be set to
on or off. For details, refer to “Good-bye
Screen” FP195.
&
Warning screen
Example of warning
If there is a warning message or a
maintenance notification, it will appear on
this screen. Take the appropriate actions
based on the messages indicated.
&
Telltale screen
1)
Telltale screen
When the corresponding situation occurs,
the following telltales will be displayed on
the telltale screen.
NOTE
When there is warning information to
display, it will be displayed in five
warning indicators, starting on the left
in ascending order of severity. If there
are six or more warning informations
displayed, pull the “
/SET” switch and
check the item.
– CONTINUED –
Combination meter display (color LCD)
191
3
Instruments
and
controls
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(194,1)
Mark
Name
Page
Door open indicator
light
Engine hood open
warning light
LED headlight warning
light (if equipped)
High beam assist indi-
cator light (if equipped)
Steering Responsive
Headlight warning light
(if equipped)
Engine low oil level
warning light
RAB warning light (if
equipped)
RAB OFF indicator light
(if equipped)
BSD/RCTA warning
light (if equipped)
BSD/RCTA OFF indi-
cator light (if equipped)
X-MODE indicator light
(if equipped)
Mark
Name
Page
Auto Start Stop warning
light/Auto Start Stop
OFF indicator light (yel-
low)
Automatic headlight
beam leveler system
malfunction warning
light (models with LED
headlights)
Windshield washer fluid
warning light
Auto Start Stop indica-
tor light (green)
Auto Start Stop No Ac-
tivity Detected indicator
light
Hill descent control in-
dicator light (if
equipped)
Driver Monitoring Sys-
tem operation indicator
light (green) (if
equipped)
Driver Monitoring Sys-
tem warning light (yel-
low) (if equipped)
Driver Monitoring Sys-
tem OFF indicator light
(if equipped)
Mark
Name
Page
Driver Monitoring Sys-
tem temporary stop in-
dicator light (if
equipped)
Icy road surface warn-
ing light
Combination meter display (color LCD)
192
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(195,1)
&
Basic screens
By operating the “
” or “
” switch on the
steering wheel, you can change the screen
that is always displayed.
Average fuel consumption screen:
: Average fuel consumption
: Driving range on remaining fuel
This screen displays the average rate of
fuel consumption since the trip meter was
last reset.
NOTE
The driving range on the remaining fuel
is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
warning light illuminates.
Current fuel consumption screen:
: Current fuel consumption
: Driving range on remaining fuel
NOTE
The driving range on the remaining fuel
is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
warning light illuminates.
Driving information screen:
: Journey time
: Journey distance
This screen displays the journey time (the
time that has elapsed since the ignition
switch was turned to the “ON” position)
and journey distance (the distance that
has been driven since the ignition switch
was turned to the “ON” position).
– CONTINUED –
Combination meter display (color LCD)
193
3
Instruments
and
controls
-------------------------------------------------------------------------------------------------------------------------------------------------------------
(196,1)
Digital speed screen:
1)
Speed limit indicator (if equipped)
2)
Vehicle speed
This screen displays the current vehicle
speed.
Auto Start Stop screen:
: The total amount of time that the engine
was stopped by means of the Auto Start
Stop system
: The total amount of fuel saved due to the
engine being stopped by the Auto Start
Stop system
The indicated values are calculated from
the most recent reset of the currently
displayed trip meter to the current time.
The indication ranges are as follows.
.
Total amount of time: from 00’00” to
9999h59’59”
.
Total amount of fuel saved: from 0 ml to
9999.999 L
NOTE
.
When the trip meter is reset, the
corresponding accumulated time and
the amount of fuel saving are also reset.
.
The time spent with the engine
stopped by means of the Auto Start
Stop system is also added to the
journey time.
TPMS screen (U.S.-spec. models):
This screen displays each tire pressure.
When a tire is deflated, the deflated tire
and the tire pressure will be displayed on
the screen in yellow.
NOTE
The tire pressure values are displayed
several minutes after driving.
Combination meter display (color LCD)
194
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст