Opel Frontera UBS. Service manual — part 975
![](/vehicle/goneen/quin/zou/noplpane.png)
REAR SUSPENSION; COIL SPRING 3D – 5
4. Insulator
Install the insulator on the coil spring. Jack up the axle
case gently with the top of the coil spring to set the
spring seat on the frame side.
3. Shock Absorber
Tighten the nut lightly, and retighten to the specified
torque after the vehicle is at curb height.
NOTE:
When mounting shock absorber, be sure not to use
grease on bushings or any other nearby part.
Shock Absorber Nut Torque
N·m (kg·m/lb·ft)
78 (8.0 / 58)
2. Stabilizer Bar
Stabilizer Bar Nut Torque
N·m (kg·m/lb·ft)
50 (5.1 / 37)
1. Parking Brake Cable Bracket
![](/vehicle/goneen/quin/zou/qupr.png)
3D – 6 REAR SUSPENSION; COIL SPRING
SHOCK ABSORBER
1
3
2
Removal Steps
1.
Nut and washer
2.
Bolt, nut and washer
3.
Shock absorber
Installation Steps
3.
Shock absorber
2.
Bolt, nut and washer
1.
Nut and washer
461RW003
![](/vehicle/goneen/quin/zou/spl.png)
REAR SUSPENSION; COIL SPRING 3D – 7
REMOVAL
1. Nut and Washer
2. Bolt, Nut and Washer
3. Shock Absorber
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear,
damage, corrosion or any other abnormal condition are
found through inspection.
•
Shock absorber
•
Rubber bushing (Axle side)
INSTALLATION
3. Shock Absorber
NOTE:
When mounting rubber bushings, be sure not to use
grease on bushings or any other nearby part.
2. Bolt, Nut and Washer
NOTE:
Tighten the bolt and nut lightly, and retighten to the
specified torque after the vehicle is at curb height.
Shock Absorber Nut Torque
N·m (kg·m/lb·ft)
95 (9.7 / 70)
1. Nut and Washer
NOTE:
Tighten the bolt and nut lightly, and retighten to the
specified torque after the vehicle is at curb height.
Shock Absorber Nut Torque
N·m (kg·m/lb·ft)
78 (8.0 / 58)
![](/vehicle/goneen/quin/zou/keu.png)
3D – 8 REAR SUSPENSION; COIL SPRING
TRAILING LINK
2
3
2
1
Removal Steps
1.
Parking brake cable
2.
Bolt and nut
3.
Trailing link
Installation Steps
3.
Trailing link
2.
Bolt and nut
1.
Parking brake cable
REMOVAL
1. Parking Brake Cable
Remove the parking brake cable from the trailing link.
2. Bolt and Nut
3. Trailing Link
460RW025
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст