Isuzu Rodeo UE. Service manual — part 530
LIGHTING SYSTEM
8A–7
Stoplight Bulb
Removal and Installation
Refer to Taillight Bulb in this section.
High Mounted Stoplight Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the high mount stoplight assembly (2).
f
Remove the cover (3).
f
Disconnect the connectors (1).
f
Remove two screws.
803RX001
Installation
To install, follow the removal steps in the reverse order.
8A–8
LIGHTING SYSTEM
High Mounted Stoplight Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the cover.
3. Disconnect the connectors (2).
4. Remove the bulb (1).
f
Remove the socket by turning it counterclockwise.
825RW071
Installation
To install, follow the removal steps in the reverse order.
Backup Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the rear combination light assembly.
f
Refer to the Taillight Bulb removal step 2 in this
section.
3. Remove the bulb (1).
f
Remove the backup light socket by turning it
counterclockwise.
f
Remove the bulb by turning it counterclockwise
while pushing it at the same time.
825RW073
Installation
To install, follow the removal steps in the reverse order.
LIGHTING SYSTEM
8A–9
Front Turn Signal Light Bulb
Removal and Installation
Refer to Side Marker Light Bulb in this section.
Rear Turn Signal Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the rear combination light assembly.
f
Refer to the Taillight Bulb removal step in this
section.
3. Remove the bulb (1).
f
Remove the rear turn signal light socket by turning it
counterclockwise.
f
Remove the bulb by turning it counterclockwise
while pushing it at the same time.
825RW074
Installation
To install, follow the removal steps in the reverse order.
8A–10
LIGHTING SYSTEM
Dome Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (2).
3. Remove the bulb (1).
f
Pull out the bulb.
825RW075
Installation
To install, follow the removal steps in the reverse order.
Courtesy Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (2).
3. Remove the bulb (1).
f
Pull out the bulb.
825RW076
Installation
To install, follow the removal steps in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст